JUKI RS-1 Pick And Place Machine

Vintage: Year 2012

PCB Direction: Left to Right

Condition: Refurbished, working

Running Hours:

Series Number:

Feeders:

Missing Parts: No

Location: China

Warranty: 6 Months after instllation

Lead time: 7 Days

SMD Machine/SMT Pick And Place Machine/Chip Shooter/SMD Mounter JUKI RS-1

Feature 1 Automatic height change of recognition sensor

“The 8-nozzle “”Takumi head”” automatically changes the laser sensor height according to the height of component that to be centered.
Various components from ultra-small component to large component can be optimally placed with best tact time.
RS-1R: 6 levels (1, 3, 6, 12, 20, 25 mm) can be selected arbitrarily.
JM-100: 4 levels (16, 20, 25, 30 mm) can be selected arbitrarily.”

Feature 2 Optimum line balance and highest throughput

Changing the RS-1 functionality does not require head replacement. The revolutionary design self-optimizes based on the production requirements. The RS-1R can reduce the workload on high speed. A line with two or more RS-1Rs can adjust to a wide variety of production requirements from high speed to high flexibility.

Electric Feeder Series

The electric double tape feeder holds two 8mm reels in the space(17mm) of a single traditional tape feeder. This doubles the feeder capacity of the machine which means there is a greater chance of clustering boards into a single feeder setup. It also could reduce the total number of machines needed in a production line.

The motor drive enables smoother component feeding and high-speed stable component supply. Lineup of feeders supporting 8-mm to 88-mm tapes: a variety of components from a subminiature component to a large one can be supported. Contribution to increased production efficiency with seeking improvement of the operability including a component pick-up position automatic correction function.

• Electric Tape Feeders and mechanical feeders can be switched by the batch exchange trolley
  When batch exchange trollies are set to four feeder banks, the mounter automatically recognizes whether electrical feeders or mechanical feeders are set.

• Effective utilization of assets
  Existing mechanical feeders and batch exchange trollies can be used without any change.
• Excellent setup workability
  The feed pitch can be switched with one touch to improve the efficiency of the setup change operation.

• Visualization of operational status
  You can recognize the operating feeder and the feeder position at a glance thanks to LED indicators. If an error occurs, the corresponding LED indicator flashes to show you which feeder should be checked.

• Component pick-up position correcting function
  After a component is recognized, the position error information of a nozzle is reflecetd to a feeder. This feature allows you to automatically control the feeder so that components can be picked up at the same time stably.

• Operability
  Work to switch tape feeding pitch has been simplified. Status indication by LED increases efficiency of setup.

• Function to adjust feeder pick up position
  Pickup misalignment as a result of part centering is sent to the feeder for automatic control of simultaneous pickup at stable pickup positions.

• Stable supply
  By suppressing vibration, parts positions can be stabilized, realizing smooth and rapid supply of super small components.

*1 For metric 0201 compliance please contact us.
*2 Using RF(RF08AS) feeders